Log in

I forgot my password

Latest topics

» "Poison Ivy"
Fri Oct 30, 2015 9:31 pm by AJracer33a

» Project Onyx
Wed Oct 21, 2015 8:46 pm by Onyx

» Hey Guys
Wed Oct 21, 2015 8:25 pm by Onyx

» WOT Tuning Basics
Mon Oct 19, 2015 12:08 pm by AJracer33a

» new to the forum/me member on fb
Sat Oct 10, 2015 12:52 pm by AJracer33a

» DSM beginner
Sat Oct 10, 2015 12:51 pm by AJracer33a

» 4G37 Timing Belt Install Gone Wrong
Fri Feb 13, 2015 2:02 am by SafetyAl

»  '93 7 Bolt 4G63T
Sat Jan 31, 2015 9:04 pm by crazyccustoms666

» My DSM History
Wed Jan 28, 2015 10:25 pm by pointblank9957

Who is online?

In total there is 1 user online :: 0 Registered, 0 Hidden and 1 Guest

None


[ View the whole list ]


Most users ever online was 31 on Mon Feb 27, 2012 6:49 pm


    Kiggly "Manumatic" Mod

    Share
    avatar
    AJracer33a
    Admin
    Admin

    Car : 95 Talon TSi AWD
    Posts : 684
    Reputation : 12
    Join date : 2012-01-18
    Location : Athens, PA

    Kiggly "Manumatic" Mod

    Post by AJracer33a on Fri Jan 20, 2012 4:33 pm

    Kiggly "Manumatic" Mod



    This is a write up written by red97rum, a member on DSM Tuners. I was granted his permission to post exact reply to me via private messaging. I plan to do this mod in the very near future and this is what I am going to follow. I will make another write up when I do it, so that way there is a better description, details, and pics. Here we go.

    By red97rum,

    I used a Hurst Promatic II shifter, picked it up on ebay for $85. I used the 5 speed shifter plate but I had to cut it up quite a bit where the 5 speed shifter mounted, and in the front to make room for the automatic shifter cable. Wasn't too hard though and it works very well. The cable end mounts to the stock gear selector on the transmission but not in the original hole as it's too big. I drilled a new hole in the gear selector arm and mounted the Hurst cable there. Then just adjusted the cable and have been ratchet shifting ever since. I had my transmission running in manual mode all the time since I don't have a TCU, so I figured a ratchet shifter would make it easier to drive around on the street.

    Here are a couple of pics I have. I actually ended up cutting more off the front of the shifter base than what is in these pictures:



    I ended up cutting out what is marked in red so the shifter cable wouldn't get bound up from being at a weird angle.









    Here's a shot of where the cable connects to the gear selector, just used the stock cable mount with (2) big washers:



    As for wiring, this is the Kiggly wiring diagram you need to use for making the trans shift manually:



    By, red97rum.

    So there is the Kiggly “Manumatic” Mod write up. Anyone using this write up to complete the mod, please post your experience below. Feel free to leave any comments below as well.


    ________________________________________________

      Current date/time is Sat Dec 16, 2017 6:04 am